DIVING EQUIPMENTS
J. K. Subsea Engineering Pvt. Ltd. is a trusted hyperbaric fire extinguisher manufacturer and supplier, building the Hyperbaric Fire Extinguisher, Model No. JK-HEX-6.8L, a non toxic foam extinguisher for the closed, pressurised space inside a diving chamber. A fire in a chamber leaves little room for error, because the people inside cannot walk away from it. Our extinguisher uses a non toxic foam agent for class A and B fires and electrical fires up to 24 volts, in a 6.8 litre cylinder charged with a fire cartridge. It is designed in line with IMCA D018 and IMCA D040, and it is the same unit we fit inside our air decompression chambers.
DIVING EQUIPMENTS
J. K. Subsea Engineering Pvt. Ltd. is a trusted hyperbaric fire extinguisher manufacturer and supplier, building the Hyperbaric Fire Extinguisher, Model No. JK-HEX-6.8L, a non toxic foam extinguisher for the closed, pressurised space inside a diving chamber. A fire in a chamber leaves little room for error, because the people inside cannot walk away from it. Our extinguisher uses a non toxic foam agent for class A and B fires and electrical fires up to 24 volts, in a 6.8 litre cylinder charged with a fire cartridge. It is designed in line with IMCA D018 and IMCA D040, and it is the same unit we fit inside our air decompression chambers.
A hyperbaric fire extinguisher is a fire suppression device made for use inside a pressurised chamber, such as a diving decompression chamber. Inside a chamber, the air is under pressure, the space is small, and the occupants breathe the same air they would be fighting a fire in. An extinguisher fitted there has to work under that pressure and leave the air safe to breathe. Ours uses a non toxic foam, which smothers fires on fabric and liquids and on low voltage electrical equipment. It is held upright and discharged in a controlled way, so the operator can aim the foam at the base of the fire. It is applicable for single lock recompression chambers, twin lock decompression chambers, and hyperbaric oxygen therapy chambers.
Our hyperbaric chamber fire extinguisher, also used as a decompression chamber fire extinguisher, is built for fire safety in closed pressurised spaces.
Have the extinguisher checked at least once a year, or sooner if an inspection shows the need. The check is a thorough one, to confirm the unit will work safely when needed. It can also show that the cylinder needs hydrostatic testing. A yearly check covers these points:
Clean off dirt and grease, and keep solvents away from the pressure gauge.
Weigh the extinguisher and compare it with the weight printed on the nameplate.
Inspect the pressure gauge, the foot stand, and the discharge lever for damage, dirt, or corrosion.
Remove the hose assembly and check it for damage. Check the air pressurising valve as well.
Look for damaged, missing, or substitute parts.
Check the date of manufacture on the hanger loop or nameplate.
Break the seal and check that the ring pin moves freely.
Refit the hose and nozzle, fit a new tamper seal, and record the service on the inspection tag.
Hang the extinguisher back on its wall bracket.
| Specification | Detail |
|---|---|
| Product Type | Hyperbaric Fire Extinguisher |
| Model No. | JK-HEX-6.8L |
| Extinguishing Agent | Foam, non toxic |
| Fire Class | A and B |
| Temperature Rating | -15 C to 50 C |
| Working Pressure | 150 bar |
| Cylinder Test Pressure | 250 bar |
| Cylinder Volume | 6.8 litres |
| Charging Gas | Fire cartridge |
| Operating Position | Upright, controlled discharge |
| Design Guidelines | IMCA D018 and D040 |
Our hyperbaric fire extinguisher (Model No. JK-HEX-6.8L) is designed in line with IMCA D018, the code of practice for the initial and periodic examination, testing, and certification of diving plant and systems, and IMCA D040, the design guideline for mobile and portable surface supplied systems. J. K. Subsea is an IMCA member.
Certified
Certified
J. K. Subsea Engineering Pvt. Ltd. is a trusted hyperbaric fire extinguisher manufacturer and supplier, building safety equipment for commercial diving chambers.
Made for Chambers: Built for the closed, pressurised space inside a diving chamber.
Used in Our Own Chambers: The same unit we fit inside our air decompression chambers.
IMCA Member: Designed in line with IMCA D018 and D040.
Wide Product Range: We also manufacture and supply decompression chambers, hyperbaric lights and cameras, CO2 scrubbers, diving air panels, and diving fittings and valves.
Non Toxic Foam: Safe to use where people breathe the air.
Clear Service Guidance: A yearly check list comes with the data sheet.
Strong After-Sales Support: Ongoing technical support for offshore and subsea clients worldwide.
Get In Touch
Running an offshore diving spread and need a TPI approved decompression chamber with a dedicated control panel and full life support equipment? Talk to our team at J. K. Subsea Engineering Pvt. Ltd. for pricing on our Containerized Air Decompression Chamber with Control Panel (TPI), configuration options, and delivery timelines.
Fill in your details below to instantly download the product datasheet.